Looks Good! Its a lot of work but you did it right! I did the transom on my V about the same way in 06. I used three pieces of 3/4 inch marine grade plywood , doubled in the center. Instead of clamps I drilled about a dozen holes in the outer skin and pulled the resin and glass coated plywood up tight with heavy wood screws. Worked really well! Reglassed the inside and gelcoated it to match. Removed the screws and glassed over the holes. My neighbor has a body shop, he color matched the gelcoat and sprayed Emron clear over the transom last. Looks like brand new! Haven't had any trouble, solid as a rock.
__________________
77 V20 cuddy with 170 I/O Mercruiser
72 16ft. Carolina w/a 25hp Evinrude
|
12-13-2017, 05:08 PM
Threaded Mode