Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #28  
Unread 04-25-2017, 11:44 PM
scook's Avatar
scook scook is offline
God
 
Join Date: Jul 2005
Location: Portland, OR
Posts: 1,432
Default

Have you checked your bilge for coolant? I had an overheating problem with my 170 when my outdrive impeller was bad and the coolant pressure caused the back seal in my water pump to fail. The coolant leaked out a relief hole and into the bilge whenever the engine got up to temperature.

If I remember correctly, the front end of the cam shaft drives the water pump and it was scored a little so I got a sleeve for it, installed it, screwed up a seal putting the pump cover back on and with some advice from Spare Parts was able to get it done on the second try and no more leaking.

It's a bit of a job - you have to remove the harmonic balancer, which is part of the alternator. I found all of the magnets were loose, lots of rust on the iron balancer and some corrosion on the coils. I cleaned that up and got several more years out of the alternator.
__________________
Scott, Portland, OR '85 V-20 I/O, Merc 170
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.