The list is there both at rest and while running. It is such that the port chine is at water level and the stbd chine is maybe 3.5" to 4" under water. If I sit on the port hatch I can get it to a little less than level.
The deck drains are mounted at the same height on each side of the hull but the stbd one is at water level when in the water and at rest. I assume, but don't know if there is a leak in that plumbing - another thing to check..
The forward rod holders drain into the cockpit but the aft ones drain onto the foam on both sides. I don't have covers for them. The boat now lives under a carport next to my house so thats a non issue going forward but I don't know its storage/exposure history.
The hull strake on the stbd side has been repaired. It looks like it kissed the ramp at some point. It appears to have been well sealed with a hard, semi clear epoxy of some sort although I haven't inspected it closely. That may be the old (or ongoing) culprit - TBD
|
07-29-2016, 07:00 PM
Threaded Mode