Quote:
Originally Posted by Kracker Jack
Yes it will need to be faired before primer and paint. I just barely bump grind the cloth then apply fairing compound as needed. Dont grind out to much you will lose strength. On this repair i had some thickened resin left so i slicked the repair with what i had left just to use it up.
|
What I have done that works really well to not sand into the 1708 is to put some 1.5 CSM down as your last layer. Just so you have something that's easy to sand and you don't have to worry about cutting the fibers on the 1708.
06-09-2015, 09:47 AM
Threaded Mode