|
|
#24
04-20-2014, 09:49 AM
|
||||
|
||||
most were made in the sarasota plant. gotta remember, these hulls are 20 to 30 years old, plus the materials & techniques were still evolving.
when i cut out & replaced my deck, i bonded a 1/2 wooden tab to the underside of the lip like a shelf around the cavity. i then cut out a piece of 1/2 ply to fit the hole, then glassed over & faired to the original edge. this left the everything flush on the deck. 
|
|
|
Threaded Mode