1708 mat for stringers

[tartuffe]

Originally Posted by cterrebonne

Extensive the stringers out would make a really strong bracket. I am trying to go as light as possible. I am planning on using a aluminum bracket with out a platform. Sounds like 3 pieces of ply with knees glasses in is the ticket. I have a lot of woven roven. How would that help if used it between each piece of ply. Another thing, does the ply goes against the skin with just epoxy pb or do I put a piece of bi axle in between thE wood and the back skin?

You will want to coat the transom skin with a layer of PB using a notched trowel, coat the plywood the same way. Squeeze together and clamp. After it cures you will do the same thing with the next layer. A good amount will squeeze out and that is a good thing. Also coat the wood with alayer of straight resin to soak into the wood prior to covering with PB.

PB mix I use is resin, cabosil, and 1/4" chopped glass fibers. Those fibers add a great deal of strength.