fuse panel

[SkunkBoat]

I looked at the picture of the terminals on your link. Looks like there are no 1/4inch terminals for the Neg wires. You'll have to solder them to the neg- terminal board or buy a bus bar (with screws or 1/4inch terminals). You might be able to find a 1/4inch terminal bus that will screw directly to the Neg- screw on your switch panel.

Question...does the panel you bought have fuses/breakers for each load or is it just a switch panel? If it is like the one pictured, it has no fuses and you will need a fuse block.