Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Unread 11-23-2011, 02:33 AM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

well yeah but we need to figure out what is stopping the engine from running right.... the filter/separator being plugged wouldn't come and go.... once it was plugged you'd be done till you put a new one on.... I was thinking that you might be getting big enough chunks of crud to plug the line.... if the crud stays in the tank and slowly dissolves over a couple years but doesn't effect the engine then it's no biggy but if it is making your engine run lean you are in a bad way. maybe your fuel pump on the engine is dying.... when it starts running poorly does the squeeze bulb collapse?

Have you tested with a portable tank?

the pickup does not need to be any specific distance from the bottom but it wouldn't hurt to raise it 1/4" or so too make sure it isn't touching. You may be able to simply bend the tube a little.... just remember that the higher you go the further you have to swim LOL


BTW you need to NOT be running the engine lean.... if it is losing power from lack of fuel you are almost definitely doing damage.... Lean is hot.. hot causes detonation... detonation destroys pistons and destroyed pistons destroy cylinders

might take hours or might take seconds

Last edited by smokeonthewater; 11-23-2011 at 02:45 AM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.