input on motor/bracket setup etc.

[jedvandale]

So, after some research I've determined that my motor is a 1977 E'rude 140. Model #: 140743s. What does the "S" mean? Also, it's a 20" and after measuring I've also determined that the bracket (it's a converted I/O) I got with the boat is set up for a 20" motor. I've read on here that a 20" is a bad idea on this boat. Obviously it's not good for your motor to take a sip of water, but will this setup be any different than any other boat with a 20" motor? The cav plate will be where it's supposed to and if you come off plane too fast in any boat, or are in a high enough following sea, your *** is gonna get swamped, am I right? One more thing, the bracket appears to be home made from stainless plate. The budget doesn't allow anything else (the boat was free, motor a trade, and trailer $150) so it's going on but I thought I'd get some input anyway so I'm posting pics. Thanks for the help guys!!!!!