Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Unread 06-30-2010, 08:02 AM
RidgeRunner's Avatar
RidgeRunner RidgeRunner is offline
God
 
Join Date: Aug 2009
Location: Lakeland, Fl
Posts: 2,526
Default Trailer springs

Check your bloody trailer springs. If you have a spring type setup and not a set of them fancy torsion jobs.

I have had no issues for 10 years with this trailer. Did I say that out loud? I pull the boat out of the barn for a little clean up and notice the tire is on the fender. Broken spring. Took it all apart and all four springs were broken where the bolt holds the individual leaves together. Basically the u-bolts holding the axle to the springs was keeping everything flying in close formation. Not easy to inspect with the boat on the trailer as you have to get on the ground and climb underneath the boat but I will pay closer attention to that area of the spring from now on. This trailer was an accident waiting to happen and I would not have appreciated starting the weekend off with a roadside breakdown.

That said I need opinions. Are the coated springs any better than the painted? AND There is a little slop in my shackles. The holes in them are egg shaped by about 1/16". Replace it all? What do you think? Thanks
Vic
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.