New here!

[reelapeelin]

Originally Posted by willy

I have the same set up for my 92, and Wellcraft did not do anything to prevent water going in when the seat is not mounted. It would just drip into the bildge below if water got on the deck.
Inaforty I would recommend also you pull the screws and plate and put some 4200 on the back side of the plate and the screw holes and re-bed. Wellcraft did not seal them well from what I could see on other boats as well.

That's why I brought it up...seal not only the screw-holes, but check and see if Wellcraft sealed the sides of the holes the pin goes through as well?...the good news is from the pics he's postin' the deck appears to still be solid, so they musta done somethin'...