Quote:
Originally Posted by spareparts
what kind of tach are you using to set the idle rpm, the one in your dash is probably not accurate enough at low rpm, I set the idle rpm usually by ear if i don't have my shop tach handy. I set it high enough where it will idle in gear, but when I pull it out of gear and back in, the boat doesn't lurch and you don't have a big clunk when shifting, try going from fwd to reverse, as long as it stays idling, adn it doesn't shift too harsh, you should be ok
|
Yeah, just referencing the tach on the dash. Again, it idles fine after it the motor has warmed up for about 10 minutes. I believe it's around 750 - 1000 and I can shift into gear with pretty smoothly.
07-13-2009, 05:57 PM
Threaded Mode