trailer brakes

[cfelton]

I got a new Titan acuator Wednesday. I bolted it on and hooked up the brake line and reverse solenoid wire to my reverse light circuit. I couldnt get them to bleed out, so I checked back here where Airslot did his brake job. Found out I had the same trouble you did Air! I was reaching over the tire and turning the whole two piece bleeder valve. I took off both tires and looked , and the bleeder is screwed into an adapter fitting thats screwed into the caliper.Once I found this out bleeding them only took a few minutes. If anybody needs brakes these are the real chit. They really work GREAT!!!Man, I CAN STOP NOW!!! Thanks Airslot, I owe ya one!!!