211 scorpion new pics

[kheid]

paint was seagloss topside paint i had leftover from another job i pressure washed most of the gunk off when i bought the boat then wiped it with some acetone and rolled it on with a foam roller...... had three or four small cracks i ground out with a dremmel and filled with some marine putty then sanded .....the nonslip that was on it already looked fine and where the cracks were filled and sanded i put some non slip in a salt and pepper shaker and lightly sprinkled it on waited till it dried then put a 2nd coat on it turned out pretty good for an amatuer ..... thanks