Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Unread 04-26-2015, 08:48 PM
thebottomfish thebottomfish is offline
Member
 
Join Date: Oct 2014
Location: Northern New Jersey
Posts: 54
Default

Well I found two things today both relatively easy fixes.
Two of my spark plug wires we're chewed right at the boot so it caused an intermittent misfire, explaining the lack of power.
Other issue is that the throttle cable seems out of whack, looks like it only opens the butterflies about 1/3 of the way open. So they were only opening to about the 2k mark.
Tried to adjust it from the engine side but I can't get complete range of motion, it's either closed at idle and opens to about half way, or slightly open at idle and almost all the way open with the throttle pinned.
Should I mess with the adjustments at the control box or just expect to replace the cable?
Did compression test, great numbers, spark test is where I realized the wire issue.
Thanks for the advice so far!
__________________
84 v20 step lift
99 Johnson 175hp
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.