Trailer to bow ladder for V20 Sport Fish

[deepguy]

Originally Posted by RWilson2526

Very nice.....I have been kicking that idea around a little bit myself. With my wife attending to the 2 kids I launch alone almost virtually every time I go out. At 44 I can still get up and over the bow rail no problem after disconnecting the cable but guaranteed the day will come where it gets a little harder. More importantly I dont like the strain I put on the bow rail pulling myself up and over repeatedly.....Being I'm in the sheet metal business I could get one thrown together from stuff lying around in no time but I guess its like the shoemakers kids with no shoes thing.

First step above tongue is 12x6x 1.5 inches
Second step 13x6x 1.5 inches
Third step 14x6x1.5 inches.
The post is 3 inches
The height of each step is from 12 to 24 to 36,inches.
They added the step below the tongue 6x12x 1.5 inches own their own.
Which made the setup a little nicer.
The measurement I had from bow to tongue was 47 inches.

Do not know hand rail size but think it is .5 inch diameter.
They added the hand grab rail between step 2 and step 3 on their own
and that is handy to hold on when standing on the ground getting ready
to go up.
Wanted a slick step with sandpaper strips as I did not want them
to be too rough on feet if bare footed.
You could go lighter material. But these steps feel good and do not give or move while using them.

Deepguy