Vro

[Skools Out]

Originally Posted by tsubaki

If your going to the trouble to change the thermostats, might as well change the temperature (overheat) sensors.


replacing it and t-stats.

You have the wrong motor for him yours is a cross flow not even close to his. he has a looper with a totally different t-stat and head set up.


don't run 50:1 if you plan on running your motor at higher RPM's the VRO motors at 4000 RPM and above were oiled at 40:1 so best off to run 40 :1 premix with oil for safety