|
|
#31
|
|||
|
|||
Re: How do you fix hairline cracks in gelcoat
Those cracks are superficial. No need for the glass. I like the way skoolz used his grinder to prep the crack . . . but it's a little risky unless you have a very steady hand. dremel tools are a little safer. Also you can get matching gelcoat through minicraft . . . they sell in a liquid or a paste (which is just thickened gelcoat using cabosil)
Get the paste. Grind out the crack. Clean with acetone Tape off the area fill with the thicken gelcoat. spray on PVA let it dry. sand flush with existing surface start with 120 (on a sanding block) all the way to 600 (wetsand) buff and wax. On vertical areas like that I like to use 3M 2" blue tape to prevent any sagging . . . just put tape over the repair.
__________________
1971 222 Hiliner 1973 23 Seacraft Center Console 1973 23 Seacraft Sceptre 1971 25 Seacraft Seafari 1972 28 Cary 
|
|
#32
02-25-2007, 03:27 PM
|
|||
|
|||
|
Re: How do you fix hairline cracks in gelcoat
Those cracks are superficial. No need for the glass. I like the way skoolz used his grinder to prep the crack . . . but it's a little risky unless you have a very steady hand. dremel tools are a little safer. Also you can get matching gelcoat through minicraft . . . they sell in a liquid or a paste (which is just thickened gelcoat using cabosil)
Get the paste. Grind out the crack. Clean with acetone Tape off the area fill with the thicken gelcoat. spray on PVA let it dry. sand flush with existing surface start with 120 (on a sanding block) all the way to 600 (wetsand) buff and wax. On vertical areas like that I like to use 3M 2" blue tape to prevent any sagging . . . just put tape over the repair.
__________________
1971 222 Hiliner 1973 23 Seacraft Center Console 1973 23 Seacraft Sceptre 1971 25 Seacraft Seafari 1972 28 Cary
|
|
#33
02-25-2007, 04:52 PM
|
||||
|
||||
|
Re: How do you fix hairline cracks in gelcoat
Dremmel makes a FOOT that holds the tool on an angle for removing the grout from between ceramic tiles...it HOLDS a preset depth ... I never did it, but seems to me it would work well for this application as well :D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#34
02-25-2007, 04:52 PM
|
||||
|
||||
|
Re: How do you fix hairline cracks in gelcoat
Dremmel makes a FOOT that holds the tool on an angle for removing the grout from between ceramic tiles...it HOLDS a preset depth ... I never did it, but seems to me it would work well for this application as well :D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
|
|
Linear Mode
