Hammer's transom Rebuild

[C YENSEN]

come on man it aint that hot out there ::)

[Franco]

Hammer, keep an eye out for a package in the mail friday. Hope you like it!

[msbhammer]

Been looking Franco, no luck yet. ;D , but wait to see what it is. ;D ;D ;D ::)

[msbhammer]

Finished up all the glass work today on the V. Just need to sand and prime the inside. I think I migt have broken a transom record here. *;D
I'll have teh cap on by next week, then the real artwork of glassing in the seams and hiding my cuts will begin. ;D



Glassing in a new battery box tray.



Install a new hull drain.

[C YENSEN]

awesome work buddy, really awesome work, cant wait to see the finished product ;) 8)

[Skools_Dual]

looks great but you need to run a layer of glass from inside the transom over the transom and down about 4 inches on the back of the boat so it seals the wood in water tight and for non flex strenght.

[THEFERMANATOR]

Originally Posted by Skools_Dual

looks great but you need to run a layer of glass from inside the transom over the transom and down about 4 inches on the back of the boat so it seals the wood in water tight and for non flex strenght.

I was thinking the same thing, but I'm no glass man.

[msbhammer]

Thanks SKOOL, Wasnt sure how I was going to do that. Thought about running cloth over the splashwell and onto the outer skin. *???

Just realized that I need to recut my stringer drains. :-[

[msbhammer]

Wondering if I should hold off on putting the cap on. Would love to stick a bracket on it. Easy access to bolt it on while the cap is off. :-/

[Blue_Runner]

Hammer if you stick a bracket on there you won't want to sell it!

Glass it up and send it down the road - then finish up your dive platform and go diving....don't foget the underwater pics 8)