![]() |
|
#1
|
|||
|
|||
|
has any one ever done this. i would have no use for a cuddy cabin so i figured if i have to replace some things any way why can't i cut the cabin out get rid of the windshield. make some sides that do from the top to the deck. just an idea.
|
|
#2
|
||||
|
||||
|
Or, you could sell your cuddy and buy a CC model ;D
Sorry, couldn't resist saying that! I'm sure it could be done, but with all the work and $$ involved, I think you'd be better off buying the CC model. You know, they also have a dual console model with a walkthrough windshield that looks like a hybrid cross b/t a CC and a cuddy. Macojoe would kill for one, but he'd have to address those skimpy side winders :o You see, he's not tough enough to handle a little spray (don't let those tatoos fool you). ;D JK MJ :D
__________________
1994 Wellcraft V21 |
|
#3
|
||||
|
||||
|
never tried it but there is no stuctural support to hold the front solid. I won't suggest trying that. If you want a CC, better buy a CC. when you remove the cap the front of the hull gets wavey abd isn't real stable. that's in my opinion.
Suggest buying a CC.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#4
|
||||
|
||||
|
hey this is a great deal for a CC may be worth the drive ask Franco if he is near it he could maybe check it out.
1990 Wellcraft 210 center console http://cgi.ebay.com/ebaymotors/1990-...78683822QQrdZ1
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#5
|
|||
|
|||
|
a little too far for me to go and get.
|
|
#6
|
||||
|
||||
|
Here's a CC in NY. You've probably seen it on eBay:
http://cgi.ebay.com/ebaymotors/1974-...31QQrdZ1<br />
__________________
1994 Wellcraft V21 |
|
#7
|
||||
|
||||
|
I was thinkin' the same as Skool B4 readin' his post...pretty sure hull across bow would lose structural integrity...nothing to keep sides of hull in place...couldn't recommend anyone do that...agree better to START w/a CC...look around (stay on this board) and you'll find one... ;)...
Now, on the other hand, if you're a structural engineer and expert fiberglass tech...have at it... ;D...post pics...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#8
|
|||
|
|||
|
actually im 21 on my way to becoming an mechanical engineer. i would figure a way to make sure its sound. you would need some sort of a step up ther and make some u stringers that went all the way to the top side. but i would have to take a close look at it. if some one sees one on the east coast let me know. i would prefer a i/o model with a shot motor so i could have a full transom.
|
|
#9
|
||||
|
||||
|
If I got a dual console I would get a inclouser and the side window would not be a issue!!
me a wus?? I can be at times!! But not with water!! We went out once and got attacked by Green head Flys! Werll 10 min later i pulled the boat out the water and was done for the day! >:(
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#10
|
||||
|
||||
|
What a wus! ;D
__________________
Heavily medicated for your protection. |
![]() |
|
|