|
|
#11
|
||||
|
||||
Re: Replacement hatches and rod boxes
YEAH, MINE ARE 2 PIECES
__________________
I have been through some terrible things in my life, some of which actually happened. 
|
|
#12
08-18-2005, 05:59 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Swot I thought...under the heading: "anything can be done if you put your mind to it"...a lid COULD be made of Starboard... or somebody real handy w/fiberglass oughtta make up about a dozen or so...hmmmm...who could do that????... ::)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#13
08-18-2005, 06:27 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Hey Oz, I got the guy here in Vero Beach that can do it
__________________
I have been through some terrible things in my life, some of which actually happened.
|
|
#14
08-18-2005, 07:14 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
That's what I thought, I guess I'll try starboard. I found out that you can cut a grove in the starboard and then heat it with a heat gun to make various things, like a cup holder. Hopefully I can make the hatch without screwing up too much material.
|
|
#15
08-18-2005, 07:16 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Oz the measurements wer what you gave me before. I mad a half way decent wooden temp hatch cover. So I think I can do it with Starboard now. Wanted to try with wood first because its cheaper.
|
|
#16
08-19-2005, 10:21 AM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Good idea, 47...I keep thinkin' 3/4" for the top of that hatch w/1/2" sides and front...1/2 goes under the 3/4, deep counter-sink the screw-heads and run a 1/2" round-over router bit(take the screws out for this) around the 3/4 edge...TRICKY part will be gettin' a "lip" of sorts to extend under the center window...ain't quite figgered that one out yet... ::)...just remember:"form follows function"...it'll happen... ;D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#18
08-19-2005, 02:17 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
IF WE COULD BUILD A BOAT COMPLETLEY OUT OF STARBOARD, MJ WOULD HAVE ONE!!!!
__________________
I have been through some terrible things in my life, some of which actually happened.
|
|
#19
08-19-2005, 02:34 PM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Hey MJ there is a boat out there that is 100% plastic http://www.triumphboats.com/
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#20
08-20-2005, 12:48 AM
|
||||
|
||||
|
Re: Replacement hatches and rod boxes
Glad MJ stopped when he did...that stuff's HEAVY as H__L...I's afeerd he's gonna SINK IT... :o...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
|
|
Linear Mode
