ANCHOR ROLLER/PULPIT 4 CUDDY - Page 2

macojoe · #11 10-20-2003, 01:26 PM

I have a dog, and he will run up there and throw the anchor for me!!
But you have to feed them well! But I have good news for you, I saved a bunch of money on my car Ins. with GEICO!! *;D

#12 10-20-2003, 04:25 PM

Macojoe, BIG SH!T, Any dog can throw an anchor.

Can he fetch one?

reelapeelin · #13 10-29-2003, 02:05 PM

Hey Seakindly...

look on The Hull Truth...lotta info under thread called bow pulpit

if you're not familiar w/it, it's thehulltruth.com...almost as much fun as this site, but not quite....

#14 10-29-2003, 03:49 PM

Thanks RaP, been there, done that, it was helpful.

But the steplift cuddy design presents it's own special challenge to installing this type of setup ???.

I have obtained the materials for my beastly solution. Tomorrow, I drill :o.

chumbucket · #15 10-29-2003, 05:12 PM

Don't be scared young Jedi Knight. Drill away.
Hopefully BigS sends you that camera soon so you can so us pics of your project. ;D

macojoe · #16 10-29-2003, 08:16 PM

Drill away!! its only fiberglass!! If not right the fill and drill again!!

#17 10-29-2003, 11:42 PM

It will be right, and a fine example of beastly ugly overkill. ;D

chumbucket · #18 11-10-2003, 08:33 PM

Hey Seakindly, I see in the new pictures that 70wellcraft posted in the gallery, he's got a pulpit on the bow of his boat. Have you already started drilling yours?

#19 11-12-2003, 01:30 AM

Believe it or not, I just finished mounting the bow lights today. I enjoy doing this stuff, but it takes me FOREVER.

All I have left to do is install some seafoam starboard as a veneer around the base of the aluminum platform that spans the forward sliding hatch cover. Purely for cosmetics, the system is functional at this time.

I am lookin forward to posting some pictures, soon. This project turned out to be much more complicated and expensive than I had originally envisioned (They always do). Overkill. It may not have even been necessary, but I am sure it will give me many years of fine service.

chumbucket · #20 11-12-2003, 11:11 AM

Overkill's not a bad thing. There's a tremendous amount of strain that's applied to the end of that roller and you certainly don't want it pulling through your deck then having a bigger project on your hands.
Can't wait to see the pics.