Question about Kwik poly - Page 4

bradford · #31 08-16-2014, 04:06 PM

Quote:

Originally Posted by Striper80

Its been tough budgeting my time between my Wellcraft and Grady.

1st World problems my friend!

Striper80 · #32 10-18-2014, 04:40 PM

I decided to cut open the transom cap. I found the wood going up to the top of the transom was in worse shape than expected. I decided to gut the transom and go with seacast or another pourable material. It stinks because I had to cut out the glasswork and repaired wood.

THEFERMANATOR · #33 10-18-2014, 05:23 PM

Quote:

Originally Posted by Striper80

I decided to cut open the transom cap. I found the wood going up to the top of the transom was in worse shape than expected. I decided to gut the transom and go with seacast or another pourable material. It stinks because I had to cut out the glasswork and repaired wood.

OUCH! That KWIK POLY treated wood is some TOUGH stuff.