![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			OK guys so I took the boat out yesterday, and wouldn't you know it Murphy's Law was in full effect. after a day of fishing with no problems I crank her up to head in and I've got no forward gear, just throttle reverse is OK but it doesn't even act like it wants to go into gear. I can throttle her up and nothing worked fine before our last drift so I'm perplexed. After a call to my Dad he instructed me to try and adjust the small cylinder that is threaded onto the shift cable, that didn't work. Any Ideas?
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	1974 V-20 Steplift CC 165 Mercruiser I/O "The fishing was good; it was the catching that was bad."  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Please keep in mind I am a novice and running on some speculation here: 
		
		
		
		
		
		
			Any chance the button is stuck that you push to keep it from going into gear when starting up? I have never looked at this close enough to see what it actually does. I assume it disengages a shifter cable. If this shifter cable is moving the connection at the transom, you might have an outdrive issue. I assume this was all working fine after the last time the outdrive was installed? You may need to pull the outdrive back a few inches to make sure the shifter "linkage" is set up correctly. rkc 
				__________________ 
		
		
		
		
		
	
	Sorry to say that I no longer have a 1984 V20 :(  | 
![]()  | 
	
	
		
  | 
	
		
  |