|
|
#11
|
||||
|
||||
yea I wouldnt varnish it unless i was useing mahogany , with the teak its a naturally oily wood,,,,,, back in the day they would make clock parts from teak because they stayed oily
Iam in to process of finishing mine now tomorrow i'll take some snap shots. Air for you I'll do it .....lol .... send it up brother  
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#12
04-14-2008, 09:28 PM
|
||||
|
||||
|
as odd as it sounds, I've seen profesional detail people apply oil based varnish over oiled teak, I would never have thought it would work. Go to wooden boats web site and see if you can do a search for teak refinishing, you may have to pay a fee for the info( bunch of tight wad stick boaters) from their archives, but it might be worth it
|
|
#13
04-14-2008, 09:47 PM
|
||||
|
||||
|
spare it probably would work but when it comes time for refinishing its a pain I bet cause it would all have to be sanded completely
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#14
04-15-2008, 05:48 PM
|
||||
|
||||
|
heres my teak
    And the seats next to one of the weathered ones.... 
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#15
04-15-2008, 05:50 PM
|
||||
|
||||
|
and the secret ingredient
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#16
04-15-2008, 08:40 PM
|
||||
|
||||
|
Thanks Now I Have A Pic Of What I Need To Buy.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#17
04-15-2008, 10:32 PM
|
||||
|
||||
|
nice work Lumber, how come you don't post the childlabor involved
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#18
04-16-2008, 06:51 AM
|
||||
|
||||
|
Quote:
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#19
04-16-2008, 11:40 AM
|
||||
|
||||
|
Oh I know all about that too
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#20
04-16-2008, 11:15 PM
|
||||
|
||||
|
I've been stripping varnish! One of the steps got hit by something in the tool box and it looks like the varnish literally shattered! I used a wood chisel and stripped the varnish off with absolutely no problem what so ever. I'll go buy some of Lumber's secret weapon this friday. Thankfully i only varnished one rod holder, one side of the splashwell board, and a the steps going down into the cabin. Wait a minute, which one do i buy? He had a can of 'classic teak" teak oil, a can of "natural light' teak oil and a can of 'dunkin donuts" teak oil.
__________________
1983 V-20 capsized. . . . in the garage.
|
 |
|
|
Linear Mode
