![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Ok the reason I put the year down is because the bow rail is turned down at both ends, if you have one you know what I'm talking about, I have broken fittings but I can't see how they will slide off cause of the bend in the rail, so what I plan on doing is cut the middle in the front so now I will have a left side and right side  ,,, replace the fittings( which  I have been replacing for the last 20 years)  and use a 1 inch stainless steal pipe to bring the both ends together as one piece     ,,,, use screws to connect,   Does that sound right to you guys, am I missing something that won't work?    I don't think so but if I am please let me know before I cut my rail in half,  thanks for any info,,, I plan on doing it very soon  before the winter( I hate winter)  comes    ,
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	love to fish  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Then again maybe it would be a good winter( I hate the word) project
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	love to fish  | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 Quote: 
	
  
		
				__________________ 
		
		
		
		
		
	
	'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha  | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			I did not ,maybe I should try that first before I cut it in half, good advice  thanks
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	love to fish  | 
| 
		 
			 
			#5  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Good advice but I just looked at the bend and it looks like almost a 90 degree bend so going back the plan A,, I think it will work out fine   ,just wanted to check with you guys before I cut,,,then I can't turn back
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	love to fish  | 
| 
		 
			 
			#6  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Can you get a Hickey and straighten out the bend a little to get the fittings around them.
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.  | 
| 
		 
			 
			#7  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Actually I just found a hinged  stainless tee fitting   So I won't have the cut or take it apart
		 
		
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	love to fish  | 
| 
		 
			 
			#8  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 Quote: 
	
    
		
				__________________ 
		
		
		
		
		
	
	1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.  | 
![]()  | 
	
	
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |