|
|
#1
|
|||
|
|||
rub rail on my v20
 anyone know where I can get a new rope for my rub rail
|
|
#2
03-18-2012, 05:07 PM
|
||||
|
||||
|
Tank Do a search if I remember someone else just did theirs last year.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#3
03-19-2012, 01:08 AM
|
||||
|
||||
|
That was Lumber a few years ago, here is the link:
http://wellcraftv20.com/community/sh...light=rub+rail
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#4
03-19-2012, 07:22 AM
|
||||
|
||||
|
Any rope will do...doesn't have to be any special MARINE GRADE rope...last time I bought some for the rub rail was from a hardware store and be sure to get the right size diameter for YOUR rub rail...I wouldn't get a cotton fiber rope...needs to be nylon or some synthetic fiber...color is your option...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#5
03-19-2012, 10:03 AM
|
||||
|
||||
|
When I replaced mine a few years ago I used 5/8" three strand. I greased up the rubber part with dawn dish soap and spread the flanges with the knobbed end of a craftsman screwdriver handle as I went along inserting the rope. Be sure to leave it "long" for a while hanging in the splash well as it will shrink up after some time. Afterwards tape up the ends and cut off the excess.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 Last edited by bradford; 03-19-2012 at 04:18 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
