![]() |
|
|
|
#1
|
||||
|
||||
|
Sorry Ive been slack on the post and pics, but finally got my light grey durabak in the mail and I'm damn near finished with the V20(for this season anyway). I can't believe everything I've done since I got it. I ran it offshore last Sunday in a nice 2' swell and it was awsome! Coming back in against the wind was nasty but it rides so good I cant believe it. I'm loving this boat! Anyway, I figured I'd paint the deck and shut down all boat repair operations for this year so as to not forget why I got it.......to fish and ride! I know I need to sand the deck well but where do I get the Xylene to clean after?
I'm heading offshore to fish a few reefs Sunday and will post pics Sunday night of all progress and trip. Thanks guys!
__________________
1984 Wellcraft V20 Steplift Cuddy 2004 200 HP Evenrude USCG Captain Brent Highsmith Kayak.Fish.StCatherines Mothership Charters email [email protected] |
|
#2
|
|||
|
|||
|
I would think you could use acetone, which would be available at any hardware store.
|
|
#3
|
||||
|
||||
|
check with a comercial paint supply
|
|
#4
|
||||
|
||||
|
Check the hardware stores and Lowes or Home Depot.
One of the paints we were useing a several weeks ago required it to be used as cleanup or thinner.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
|
#5
|
||||
|
||||
|
I would try to get Xylene or substitute with Toluene. Both should be available at paint supply or HD or Lowes.
__________________
Heavily medicated for your protection. |
|
#6
|
||||
|
||||
|
I got it at Ace Hardware when I did it.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
![]() |
|
|