![]() |
|
|
|
#1
|
|||
|
|||
|
Just read the post on round live well. I have an 84 V-20 Cuddy with a rectangular well in the center just aft of the Captain Seats. I have been using it as additional storage for lines, anchors, etc. There is a pump in the bottom beside the drain hole. Do any of you guys have the same setup, and if so, how do you use it as a live well... where is the water source, or do you simply fill it with water by bucket and use the pump to change it? Any info would be a help.
Thanks, Ken Clelland aka: Lead Head |
|
#2
|
||||
|
||||
|
I have a 1990 V20. My live well is located in the floor between the seats. There is no pump for bringing water in or out. I use a bucket to fill and drain to the bilge. I too would like to hear of the other set ups. Bill Mc ;D
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug |
|
#3
|
||||
|
||||
|
I have two tanks in the floor of my boat, both have drain nothing else. I use for ice and fish, I can hold 200# Fluke in there with ice and not use any deck space ;D
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#4
|
||||
|
||||
|
What do you use for live well MJ
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#5
|
||||
|
||||
|
Well I use to have a 1/2 barrel home made one, but it was to big and It was in the way all the time.
Then here in Mass, we now have a 3 year close to all Herring!! So no more live lining them. Now I fish live Scup, I made a nice small 20 gal live well, it goes in the old engine well under the I/O cover. Its there when ever I need it and not in the way at all when I no use it. Dark out now, but I will take a pic tomorrow and post. Nothing special, home made. but it will keep a dozen Scup alive for a long time! and when they are gone or dead I can just go 1/2 mile and get some fresh ones to put in the tank! Works for me ;D
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#6
|
||||
|
||||
|
;)
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#7
|
||||
|
||||
|
lead head,got the same set up on my 83. I used it for storage or a fish box when we actually catch fish. The pump is for pumping all of the slime water out. I took an old styrafoam cooler about 1 " thick and cut it up and siliconed the pieces to the inside and it holds ice real well. Just don't put any foam on the bottom.
|
|
#8
|
|||
|
|||
|
i have the live well/ fishbox just aft of the seats... guy i bought the boat fron put a water puppy in the engine box... the water puppy fills it up and the box pump empties it out.
|
|
#9
|
||||
|
||||
|
Lead Head, I keep an extra pump w/ about 6' hose on it in the boat for pump-outs...that way, I can get it goin' and go on down the lake, but I'll tell ya, most of the time I do use a bucket...easier and quicker than pump...the pump in your well...is there a hose?...where does hose go?...
You can get as fancy plumbin' a bait-well as you wanna...I'd keep it simple and only aerate/circulate as needed by the particular bait you need to keep alive... ;)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#10
|
||||
|
||||
|
Well here's mine, works for me
![]() ![]() ![]()
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
![]() |
|
|