|
|
|
|
#1
|
|||
|
|||
Bilge/battery hatch taking on water
I have an 87 v20 steplift with a outboard 175 Johnson. Anytime I have the stern facing seas water comes inside and over the transom and drains out through the drain holes but it also leaks in through the bilge cover and into the bilge. The lid does have 4 screws to hold it in place. Don't know if that was the way it came from the factory. Anyone else having this problem and is there s fix?
|
|
#2
05-16-2016, 12:11 PM
|
||||
|
||||
|
Not sure what hatch you are talking about without a picture. There are different versions of V20s
Is it it in the motor well? Probably an add on from prvious owner. If it can be screwed down then it should be. Open access ports in a motorwell are the #1 reason for small boats to sink at a dock.
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!) 2000 GradyWhite 265 Express YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0 https://www.youtube.com/watch?v=Oe_ZmPOUCNc
|
|
#3
05-16-2016, 12:53 PM
|
||||
|
||||
|
3m 4200
|
|
#4
05-16-2016, 02:27 PM
|
||||
|
||||
|
sounds like "bilge cover" is not sealed....3m 4200 or some other sealant as suggested should do it, right?
__________________
 1994 Wellcraft V21
|
|
#5
05-16-2016, 05:15 PM
|
||||
|
||||
|
He might have one of those plastic hatches in the splash well. If so be careful, they can sink you. someone posted a vid a few years back of a guy spearfishing with a go pro and swims back to the boat to find it listing hard and going down. Last fra,e was the coast guard chopper.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
 |
|
|
Hybrid Mode
