|
|
|
|
#1
|
|||
|
|||
Steering cable nut
I have a older Johnson 140 hp, the nut on the starboard side of the tilt tube that the steering cable goes thru is on so tight ,will it be ok to use a tourch to heat it to try to loosen it so I can free up the steering cable, will I damage anything?
__________________
love to fish 
|
|
#2
09-08-2015, 08:11 PM
|
||||
|
||||
|
You wil lmelt the nylon bushings out of the castings if you get it very hot.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#3
09-08-2015, 08:40 PM
|
|||
|
|||
|
That's what I thought so to get it to off I just have to use pb blaster and patience it's really stuck on a lot of rust
__________________
love to fish
|
|
#4
09-08-2015, 08:52 PM
|
||||
|
||||
|
You could use a chisel and split the nut
|
|
#5
09-08-2015, 11:41 PM
|
||||
|
||||
|
Or use a small angle grinder with a cut-off wheel to split the nut without beating on it. I don't know your setup, if it makes a difference if you whack or not.
__________________
 Scott, Portland, OR '85 V-20 I/O, Merc 170
|
|
#6
09-09-2015, 05:37 AM
|
||||
|
||||
|
Be careful not to mushroom the cable end if you beat on it, ask me how I know.
__________________
1999 Wellcraft 22WA-200 Ocean Runner 1982 Grady White Tarpon 190-110 Evinrude-Sold 1996 Striper 2100WA-RIP Sandy 1989 Wellcraft 18-Sport-125 Force-sold
|
 |
|
|
Hybrid Mode
