Performance V8 Engine Parts

[aussie]

Hi guys looking for someone in the States that sell parts must be others than Summit Racing there must be a opposition

[spareparts]

http://www.jegs.com/
http://www.kmjent.com/cart/home.php
http://www.speedwaymotors.com/
http://www.northernautoparts.com/
http://www.dougherbert.com/
http://www.coasthigh.com/

that ought to keep you busy
to be honest with you, its hard to beat Summit

[THEFERMANATOR]

Originally Posted by spareparts

http://www.jegs.com/
http://www.kmjent.com/cart/home.php
http://www.speedwaymotors.com/
http://www.northernautoparts.com/
http://www.dougherbert.com/
http://www.coasthigh.com/

that ought to keep you busy
to be honest with you, its hard to beat Summit

It's not hard to beat SUMMIT's prices anymore, BUT they WILL price match to keep your business. JEGS on the other hand is ALOT easier to do price matches with as you don't have to call them to do it. Just put in the other price and a copy of the link to it and it's done.

[aussie]

thanks again Ferm I can always rely on you checked them all out .What I need is 4 connecting rods they are as 1 piece or a set of 8 .The problem is Eagle are not making these rods for the moment so im stuck . Looks like I may have dig deeper to buy a set of 8 . I really don't want to use the stock rods on my engine as it will be making more touque and I don't want them breaking . Where I plan to go fishing 90min trip one way and ill be holding the engine at 5500 rpm so I want to avoid and weak points on the engine as there little but no hope find a donor engine here . The cost of doing my rods is around 200 with shot penning - I have emailed Eagle direct and there going to see if the can make a set of 4 that the weights are with in 5 grams .Been doing a lot of research on the net on 460 hp and there are claims that it easy to get 500hp from a 460 with cast heads ; Well there might be a chance I can sell of the other extra 4 connecting rods if I can find someone stupid enough to do what im doing LOL

[smokeonthewater]

500 hp in a 4 cyl merc in a boat?

UH I don't think so Tim.... Unless ur planning on a supercharger

Now 500 hp from a ford 460 big block V8 then yeah but not a merc 470

[spareparts]

Ferm, the last few things I got from Summit were within a couple dollars of Jegs, and Jegs web site sucks, Summits site is one of ht easiest places to look up parts. I'll find what I want on Summit, then check the part number elsewhere to see if I can beat it. KMJ has had some real good deals lately. I've got a set of their rods in my 383 for the buggy