![]() |
|
|
|
#1
|
||||
|
||||
|
__________________
1994 Wellcraft V21 |
|
#2
|
||||
|
||||
|
Hey guys, do any of you happen to know if this bracket would fit nicely on a V20? I realize that the transoms for each make and model are different and therefore a bracket that fits on one boat won't necessarily fit on my V20. I just thought I would check to see if any of you happen to know off hand whether or not this bracket would fit a V20.
Maco, didn't you use a bracket that didn't fit quite perfectly? Would you have done things differently now that you've lived with it for some time? Just curious...
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#3
|
||||
|
||||
|
Go to http://www.greatgrady.com/forum/index.php and ask what the angle of the transom is on the Gulfstream. *If it's the same it should be a good fit, and if it's not, I think you can customize it (wedges) to make it fit. *MJ, didn't you do that?
__________________
http://img.photobucket.com/albums/v2...tz/captain.gifhttp://img.photobucket.com/albums/v2.../2sharkfin.gif&&&&SOMEWHERE IN TEXAS A VILLAGE IS MISSING THEIR IDIOT! |
|
#4
|
||||
|
||||
|
I just found the transom angle on the GW...it's 15*....Now, what's the v-20's again?
Beam Amidships: 9'3" Bridge Clearance: 6'5" w/Hardtop: 8'8" Center Line Length: 23'5" Cockpit Depth: 27" Cockpit Square Footage: 56 sq. ft. Hull Draft: 17" Dead Rise at Transom: 20° with SeaV2 hull (continuously variable vee) Transom Angle: 15° Maximum HP: 400 Outboard Shaft Length Single: 25" Dual: 25"
__________________
http://img.photobucket.com/albums/v2...tz/captain.gifhttp://img.photobucket.com/albums/v2.../2sharkfin.gif&&&&SOMEWHERE IN TEXAS A VILLAGE IS MISSING THEIR IDIOT! |
|
#5
|
||||
|
||||
|
I think the V20 has a 13* transom angle. Here's a thread on it but never really answered. You can see how to measure the transom angle for yourself.
http://www.wellcraftv20.com/cgi-bin/...8707139;start=
__________________
http://img.photobucket.com/albums/v2...tz/captain.gifhttp://img.photobucket.com/albums/v2.../2sharkfin.gif&&&&SOMEWHERE IN TEXAS A VILLAGE IS MISSING THEIR IDIOT! |
|
#6
|
||||
|
||||
|
Tin,
Thank you sooooo very much for the response. I appreciate all the time and effort you put into it. I'll try to figure out the degree of my transom tomorrow.
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#7
|
||||
|
||||
|
no problem, wasn't much time or effort either :)
__________________
http://img.photobucket.com/albums/v2...tz/captain.gifhttp://img.photobucket.com/albums/v2.../2sharkfin.gif&&&&SOMEWHERE IN TEXAS A VILLAGE IS MISSING THEIR IDIOT! |
|
#8
|
|||
|
|||
|
I was thinking of a bracket at one time ... so measured the transom angle on my boat - 1988. I believe it measured out at around 11 degrees.
__________________
'86 Cuddy (FICHT 150 on brkt) ------ 1988 V20 project in the garage |
|
#9
|
|||
|
|||
|
there's a boat close by i think its a GW 20 overnighter and the guy installed a full braket armstrong i think with his cutout transom. have not been on the boat in the water but he's a diver and the access in and out of the boat looks great.
__________________
1984 Step-Lift Cuddy&&1993 Johnson 200hp |
|
#10
|
||||
|
||||
|
Yeah, didn't know if would work as-is or not, but if the price stays where it is it would be a decent deal -
Oh SNAP! I just realized this is in BC Canada! Bummer! :-[ :'( ::)
__________________
1994 Wellcraft V21 |
![]() |
|
|