|
|
|
|
#1
|
||||
|
||||
floor paint
i'm going to paint the floor of my boat and a while back i saw a thread that mentioned a specific brand and now i can't find it.anyone remember what it is?
also,if i have several small old screw holes to fill before painting what would be a good product to use? thanks ahead of time!!
__________________
1983 steplift w/ a 1983 evinrude 200hp 
|
|
#2
03-28-2011, 07:17 PM
|
||||
|
||||
|
Mine may have been the thread you saw, but I'm not totally impressed with the floor paint I used. I used Interlux Perfection (2 part) with Prime-Kote for my entire deck (everything above the rub-rail), but I used Interlux Brightside (1 part) with Pre-Kote primer and a texture additive for the floors. The 1-part paint is not nearly as durable as the 2-part. It has separated from the primer in a few small areas.
|
|
#3
03-28-2011, 07:39 PM
|
||||
|
||||
|
I know a number of guys have used Awlgrip and have been pleased with it. Do a search for it and it should produce a good number of threads...
__________________
 1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/
|
|
#4
03-28-2011, 08:51 PM
|
||||
|
||||
|
I used Durabak on my 250 Sportsman floor. It holds up good and i have yet to slip on it. BUT i wish i never put it on my boat. It is hard to clean and right now is absolutely disgusting. I wish i could strip it off and start off new. I would recommend Sherwin Williams Tile-Clad two part epoxy paint. It is tuff as steel. I used it on my splashwell and bilge and love it.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#6
03-30-2011, 02:25 PM
|
||||
|
||||
|
Is it two-part? Overall, I was very heppy with the Interlux products. Especially the product availability at West Marine.
|
 |
|
|
Hybrid Mode
