|
|
|
|
#1
|
||||
|
||||
Air Ride seats installation??
I am getting ready to put a pair of air ride seats in the V-20 DC and am curious if anyone out there has done this??
suggestions and pictures are appreciatted. The seats are out of a 07 Kenworth in great shape---the air supply issue I have planned for--but ideas on this are welcome as well. These offshore runs I am doing are starting to jossle my bones and my dad at 87 said he was done fishing out there---untill now--these seats will keep him going out with me. My runs average 75 miles to 150 miles round trips in the Great Northwest!! Thanks
__________________
 88 V-20200 G2 
|
|
#3
12-21-2010, 04:13 PM
|
|||
|
|||
|
I don't have any ideas for you, but I know the NC Wildlife Officers have air ride seats in their boats, you might could do a search on them for ideas.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#4
12-22-2010, 12:45 AM
|
||||
|
||||
|
Randleman,
Ya think searching the NC wildlife website or where??? Just asking. I will be looking at mounting options on a couple of my friends tin can boats.
__________________
88 V-20200 G2
|
|
#5
12-22-2010, 02:19 PM
|
|||
|
|||
|
They were mounted in the McKee Craft boats that they had a few years back, I really havent paid attention if they still use them.
Here is a pic of the boats they were in, but I haven't found a pic of just the seat yet. http://www.boat-ed.com/nc/nc_specifi...nforcement.jpg You may contact McKee Craft, I'm sure they have info they could send you.
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#6
12-24-2010, 11:14 AM
|
|||
|
|||
|
Mckee
Mckee Craft is no longer in business.
I have a couple of photos of boat with the Mariner Seating system.   if I find some others on my home PC I'll post em for you.
|
|
#7
02-12-2011, 01:02 PM
|
|||
|
|||
|
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#8
02-12-2011, 02:10 PM
|
||||
|
||||
|
Nice find---I have saved the pictures. I am still waiting for the seats to show up on my porch for install.
That will work in my idea of mounting too!! I can do that !!! Thanks 
__________________
88 V-20200 G2
|
|
#9
04-14-2011, 02:24 AM
|
||||
|
||||
|
Seat 1 has shown up--finally--
mount for the seat is easy--just screw to the floor like a captians seat--just weld a bit wider plate to the base of the factory mount used in the truck. To figure out what to do with the other 2 seats? Side mount them or just mount behind the air ride seats on a box? I will post pictures soon. Just finished putting a radar mount on the boat---came out nice--about $1200 with 4 pole holders included with radar mount and 2 flat mounts on top. Also putting hyd steering on her as well--lots of projects to get done in less than a month to be ready for the Halibut opener off the coast!!
__________________
88 V-20200 G2
|
 |
|
|
Hybrid Mode
