Speed & Rpm

joeturse · #1 05-31-2010, 04:17 PM

Finally put her in the water today and she ran good.I am running a 2001 150 Johnson.
The tach read 4000 WOT at 35 mph.(according to GPS)The specs on the motor say 4500 to 5000 WOT.
As far as speed is concerned,and what I have read 35 mph with a 150 is about right with a V20.
I think my tach is off,what is your opinion.

Curapa · #2 05-31-2010, 04:44 PM

RPM is low. Could need a prop change.

joe7670 · #3 05-31-2010, 05:10 PM

150 should be more like 40 mph based on my readings.

I get 38-39 but still need to tweak my motor height.

Your RPM's seem a little low.

spareparts · #4 05-31-2010, 05:28 PM

your rpm spec should read 5500 rpm at wot, cehck your tach, tap on it next time you run the boat, see if it moves around. the boat tachs are nortoriously inaccurate, some times they stick

THEFERMANATOR · #5 05-31-2010, 05:44 PM

Quote:

Originally Posted by spareparts

your rpm spec should read 5500 rpm at wot, cehck your tach, tap on it next time you run the boat, see if it moves around. the boat tachs are nortoriously inaccurate, some times they stick

4500-5500 is the factory spec for WOT on that engine, but 5200-5600 will let it live a MUCH happier life. And verify the tach with a good one as tachs on outboards are VERY failure prone. ESPESCIALLY the ones that are driven off the charging system like this one is.

tsubaki · #6 06-01-2010, 04:51 AM

I agree with everybody, low speed and low rpms.
I'm scooting along at 43mph with a 14x19 prop at 5100rpms.