|
|
|
|
#1
|
||||
|
||||
Scuff Marks
Anybody have a trick for getting scuff marks off? I tried light buffing compound and an electric buffer and it didn't work, but I didn't get too aggressive.
__________________
1994 V21 W/2002 130HP Yamaha 
|
|
#2
06-07-2012, 10:02 AM
|
||||
|
||||
|
You might try a green scott brite pad? But might have to sand it out, use like 600 wet sand paper and go to finer after that will work.
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#3
06-07-2012, 11:08 AM
|
||||
|
||||
|
Get aggressive with the buffing compound IMO before you go to sanding. Some buffing compounds are really fine, more like a finishing polish. Try 3M Heavy Duty Buffing Compound it has grit. It is handy to have around, good on rust stains, oxidation, scuffs and the like. You can probably buff it out by hand. If you sand on it you will need the HD compound anyway to bring back the luster.
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
|
#4
06-07-2012, 05:46 PM
|
||||
|
||||
|
also could try some On/Off cleaner that stuff really gets the crap off!! But wear gloves and do not get on the trailer full strength, it will turn the galv black!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#5
06-07-2012, 06:49 PM
|
||||
|
||||
|
Thanks for the advice guys. MJ is this what you are talking about?
http://www.trevterrymarine.co.nz/367...om-cleaner.jpg
__________________
1994 V21 W/2002 130HP Yamaha
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
