Injecting Epoxy in Voids

As I rebuild my transom will need to inject some epoxy with and without filler in some voids. What do you use to do the injecting? A Turkey baster may work but there has to be something better. How about that tube plunger thing they use to decorate cakes?

[Stinky_Hooker]

I have used big syringes for both bondo and resin before. The big ones they sell at hardware stores in the lawn section for mixing chainsaw gas. They have the mix ratios on em, but I dont care. *;D


They work nicely and have about a 3/16 hole in the end that can be trimmed off for a larger diameter or you can add a piece of tubing for those hard to reach places.