![]() |
|
#1
|
||||
|
||||
|
Hey guys,
Is a 455 pound engine too much weight to be hanging on a bracket? *Just curious. *
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#2
|
||||
|
||||
|
properly mounted bracket on a V20 with a good transom, no I would not think so. Common weight area for engines, several guys on this board have V6 engines with brackets that weigh around that.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#3
|
||||
|
||||
|
Thanks Willy,
I just bought this engine: http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT It's counter-rotating, but I think it should do fine and got it for a good price. *$2900 plus $400 shipping to my house. *Not too shabby, huh *???
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#4
|
|||
|
|||
|
a dually w/ a bracket, and 200 ponies?.....you are stylin' now. Motor looks nice ,good luck!
|
|
#5
|
||||
|
||||
|
Looks sweet, you will be flying with that baby, lotta gas too Grace, you sure :o You own your own gas station down there ;D
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#6
|
|||
|
|||
|
Grace, I've got the same motor in the 150 version. They are known to be good, extra reliable motors, real workhorse,but, they are not known for their fuel efficiency. Every V6 200 is gonna suck it down anyway....bolt it up and enjoy!
|
|
#7
|
||||
|
||||
|
Most any bracket will hold 300 hp!! So no matter what you got the bracket will hold it!
Just have to make sure the transom was built to with stand the weight!! My motor is 390, so you are talking just 65 pounds more, I stand on mine to fish and stuff with no problems. But I am nerves with that weight hanging off the rear while trailing, all that weight bouncing! Most go just fine and never have a problem, But I made up a Transom saver that CB says will take out a 4 lane hwy if it were ever to fall off! :o But I rather be safe then have the transom crack later! And seeing that I did the transom myself I am not all that confident
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#8
|
||||
|
||||
|
i emailed that guy about both but he was to high for both. Same motor as the 200 /225 from 1988 to 1999 so their are a ton of them out there. If you want it to be a 225 just buy a set of 225 carbs. that all that changes.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#9
|
||||
|
||||
|
That's a good reliable motor Grace. Plenty of power and should last a long long time.
MJ had some good advice on trailering IMO. Going over RR tracks can be bad news for heavy outboards. But apparently you have to make your own transom saver due to the bracket? MJ - got pics of yours?
__________________
1994 Wellcraft V21 |
|
#10
|
||||
|
||||
|
Hey guys,
Thanks for all of your words of encouragement. Skools, welcome home buddy. Hey, the other motor actually sold for $3800! By the way, why in the world would you be interested in buying two more motors??? You already have the fastest motor stand in the world ;D
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
![]() |
|
|