|
|
#1
|
|||
|
|||
OMC 225 Carb Jets
Ok guys i guess this qusetion would go in the mod class, I want to modify my carb jets back to original size, so im going to fill em in with solder and drill em back out. I know i need 14s 28s and 62d's! Ok what drill sizes do i need for them sizes ? I thought they were the same as the sizes but they r not. Please help AGAIN.............Jeff
|
|
#2
02-05-2007, 09:21 PM
|
||||
|
||||
|
Re: OMC 225 Carb Jets
you need 14 and 48 sizes and don't try it go buy the correct ones from an OMC dealer
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#3
02-05-2007, 09:24 PM
|
|||
|
|||
|
Re: OMC 225 Carb Jets
dont think the solder will hold ? and the sizes of the bits i bought that size is not even close to the holes in them
|
|
#4
02-05-2007, 09:30 PM
|
||||
|
||||
|
Re: OMC 225 Carb Jets
no but you need 14 and 48 by the way i have one from up north it has 14 and 47 in it
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#5
02-05-2007, 09:34 PM
|
|||
|
|||
|
Re: OMC 225 Carb Jets
my bad, sorry, is the drill bits wire gauge or something else ? cause the 13 i got in wire size is bigger than the jet itself
|
|
#6
02-05-2007, 09:35 PM
|
|||
|
|||
|
Re: OMC 225 Carb Jets
14 i guess i need to watch my fingers better
|
 |
|
|
Linear Mode
