MJ any snow yet?

Mac_Attack · #1 03-15-2007, 09:33 PM

Our local weather forcaster says NE is in for it, possibly 12 " or more of snow. Seems like you get hit hard every year at this time.

Mac_Attack · #2 03-15-2007, 09:33 PM

Our local weather forcaster says NE is in for it, possibly 12 " or more of snow. Seems like you get hit hard every year at this time.

msbhammer · #3 03-15-2007, 10:31 PM

Almost hit 80 today here in Delaware. Did a little bit work today on th eV. yanked the battery cables off and replacing with new ones. Lifted the motor up with my pinched nerve in my neck. Yes I hurt myself doing it. :-[
Look at the trim pump. Cant figure how the pump comes off without pulling the motor. Only found one bolt to remove the trim motor. :'(

msbhammer · #4 03-15-2007, 10:31 PM

Almost hit 80 today here in Delaware. Did a little bit work today on th eV. yanked the battery cables off and replacing with new ones. Lifted the motor up with my pinched nerve in my neck. Yes I hurt myself doing it. :-[
Look at the trim pump. Cant figure how the pump comes off without pulling the motor. Only found one bolt to remove the trim motor. :'(

msbhammer · #5 03-15-2007, 10:39 PM

As a devoted member, I ran out and snapped a photo of my titlt trim motor.
Using the tilt trim swith on the controls, I hit up and down and both solinoids were clicking, making me believe that the solinoids are working....I guess.
Anybody ever yank a trim motor, do you need to pull the motor ??

msbhammer · #6 03-15-2007, 10:39 PM

As a devoted member, I ran out and snapped a photo of my titlt trim motor.
Using the tilt trim swith on the controls, I hit up and down and both solinoids were clicking, making me believe that the solinoids are working....I guess.
Anybody ever yank a trim motor, do you need to pull the motor ??

lumberslinger178 · #7 03-15-2007, 11:04 PM

sorry to hear about the neck ... i feel ur pain , when i replaced the trim motor on my 140 it had 4 bolts and was ver simple but that was a johnson not a merc . call on Dr skools

lumberslinger178 · #8 03-15-2007, 11:04 PM

sorry to hear about the neck ... i feel ur pain , when i replaced the trim motor on my 140 it had 4 bolts and was ver simple but that was a johnson not a merc . call on Dr skools

Mac_Attack · #9 03-15-2007, 11:05 PM

Yea two days ago it was in the 70's here. *This morning an inch of snow on the lawn. *MJ will be getting the same storm soon. *Billy Mac *;D

Never pulled the trim motor!

http://intellicast.com/IcastPage/Loa...p;prodnav=none

Mac_Attack · #10 03-15-2007, 11:05 PM

Yea two days ago it was in the 70's here. *This morning an inch of snow on the lawn. *MJ will be getting the same storm soon. *Billy Mac *;D

Never pulled the trim motor!

http://intellicast.com/IcastPage/Loa...p;prodnav=none