|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
|  Hi Guys, I've been away for a while. 
			
			Last December, I had some things happen that forced me to temporarily close off many parts of my life. *I won't go into details. *One thing I had to give up was boating as well as this forum. But all those things are past me now and I am back to working on the V!! *And, I am back here!! I am now in the process of doing a cap off restoration. I will start a thread in the repairs forum soon. I know you guys like pictures so I'll post the first ones here. This is what I started with.  I used the boat about 25 hours last summer. *It ran OK. *Always fiddling with the sea drive to get it running right. *But then I started to notice alot of water in the bilge. *So after the season was over I took it out and found this:  The transom was rotten. *Bad. *That lower sea drive mounting hole is the culprit. *Notice the wood just above it. *It's unaffected. *Stupid wood! >:( So, *I stripped the Boat down:  Here's the POS sea drive getting ready to be picked up. *I sold it as a parts motor on ebay for $200:  And then I pulled it apart:   I haven't yet gotten to cutting into the transon. *I am going to clean all that foam out. *It's pretty waterlogged. Here's a shot of the guts:  I will start a new thread soon in the repairs section to document this process. *I hope to talk to all of you soon. * I will be celebrating July 4th with some nice fiberglass grinding and foam digging. Hope y'all have a safe 4th!! ;D Chris | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			good luck to ya brother, that looks like a labor of love, looking forward to the pics. ;D
		 
				__________________ Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: Hi Guys, I've been away for a while. 
			
			MAN, I WISH I HAD ALL OF YOUR DRIVE AND DETERMINATION ;D  SHE WILL BE SWEET WHEN YA GET'R DONE!!!
		 | 
| 
			 
			#4  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			Well when your done she will be brand new!! And should last a life ime! Good Luck! 
				__________________ 1986 V20  Old Fishermen never die, we just SMELL that way!! | 
| 
			 
			#5  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			You going bracket and outboard or what? Good lookin so far. 
				__________________ '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			When the man makes a comeback, he makes a COMEBACK!!...nice work 8) ... and thanks for shairin' the pix ;) ...
		 
				__________________ '74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			Welcome back! Keep posting w/ pics. Good luck with your restoration. Billy Mac ;D
		 
				__________________ Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			Good luck with that restore! I'm scared to take mine apart like that for fear of it not going back together perfectly! We're starting to get quite a few members in the Savannah Ga/Hilton Head SC area. I see a V20 Get together in our future!
		 
				__________________ 1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 | 
| 
			 
			#9  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: Hi Guys, I've been away for a while. 
			
			Keep postin pix. ;D Like B said, I should tear mine apart too, but I am afraid I will get so far and then not be able to complete. :o :o :o I will continue to live vicariously through others rebuilds, and just do what is needed to mine. ;) ;) ;D 
				__________________  Bottom's up!!! | 
|  | 
| 
 | 
 |