![]() |
|
#1
|
|||
|
|||
|
in the next week or so I am going to replace the fuel lines(fuel fill/vent hose/hose from tank to motor and hose from oil tank to engine. I get a light smell of fuel also there is a oily substance (rainbow effect in the water in the bilge. hoping hose replacement will take care of this. question is were is the best(cheapest) to buy hose from? any body got any hook ups?
|
|
#2
|
||||
|
||||
|
I ordered mine from Amazon.
__________________
1999 Wellcraft 22WA-200 Ocean Runner 1982 Grady White Tarpon 190-110 Evinrude-Sold 1996 Striper 2100WA-RIP Sandy 1989 Wellcraft 18-Sport-125 Force-sold |
|
#3
|
|||
|
|||
|
Actually I have used Defender Marine for hoses. Or at least compare the prices.
http://www.defender.com/category.jsp...574&id=2243581 Also if you are going that route and putting in new plumbing, I would pull the tank. If it is Aluminum and foamed in. Chances are it might be corroded through.
__________________
1990 Wellcraft Fish 18 in repair now! Pictures coming soon! |
|
#4
|
||||
|
||||
|
Quote:
__________________
1999 Wellcraft 22WA-200 Ocean Runner 1982 Grady White Tarpon 190-110 Evinrude-Sold 1996 Striper 2100WA-RIP Sandy 1989 Wellcraft 18-Sport-125 Force-sold |
|
#5
|
||||
|
||||
|
i had a similar problem, turned out to be a small bit of the steel wire in the fill hose was exposed and touching the al tank at the fill spout. rotted out the bottom of the fill spout and everytime i put gas in, some would dribble out on the tank
|
|
#6
|
|||
|
|||
|
My tank is a poly tank so i think it will be ok!
|
|
#7
|
||||
|
||||
|
If you don't already have a stainless fuel fill, now would be a good time to upgrade. My '85 had the chrome plated zamak/potmetal kind and literally broke off inside the gunnel.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 |
![]() |
|
|