|
|
#1
|
|||
|
|||
Hey Spare!
My buddy has an 86 V20 with a 170 Mercruiser that he rebuilt last summer. He used a rebuilt head he bought from Clearwater Cylinder Head Co. It started missing and running hot. He pulled the head and found it was cracked between a couple of cylinders. Clearwater wouldn't do anything, said his warranty was out. He's looking for a new head (not rebuilt)and we haven't had much luck finding one so far. Do you have any good connections or ideas ?
__________________
 77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude 
|
|
#2
07-12-2013, 07:01 PM
|
||||
|
||||
|
I would be finding out what caused the head to crack no point replacing the head and it cracks again . you may have some cooling problems .
If you have money to spend I would buy a edelbrock proformer head I have bought one for mine but haven't fitted it
|
|
#3
07-12-2013, 07:10 PM
|
||||
|
||||
|
http://www.summitracing.com/parts/ed...view/make/ford
you can get a 75cc one as well you will need 8 of these as well http://www.summitracing.com/parts/cr...view/make/ford
|
|
#5
07-13-2013, 10:03 AM
|
||||
|
||||
|
cfelton, i sent you a PM
|
 |
|
|
Linear Mode
