Handrail For Center Console

RidgeRunner · #1 09-16-2010, 07:21 AM

I have a original equipment welded SS handrail for a 1983 20' Steplift Center Console. It is the one that wraps around the back side of the console and goes up over the windscreen. It attaches to the console with two round flanges per side and one center bolt in the back. Deleted it for a T-top on mine and it has been sitting here taking up space for 10 years.
I don't know what it is worth but I would take $20.00 plus shipping for it. I can get a picture of it for anyone who may be interested.
Thanks,
Vic

Slightly_Twisted · #2 09-16-2010, 09:08 AM

Hey Vic can I get a few picsto see if it would fit. I'm looking for a new. I have a 81 center.

THanks

RidgeRunner · #3 09-16-2010, 03:41 PM

Here are two pictures Slightly Twisted. I am not sure what model year console it fits other than the 1983. If I need to measure something let me know. handrail 001.jpg

handrail 002.jpg

draglink · #4 09-17-2010, 07:18 AM

I'll take it if Twisted passes, I'll measure my console when I get home. THANKS!

Slightly_Twisted · #5 09-17-2010, 09:18 AM

Thanks Vic

I think I'll have to pass I won't be able to mesure the console until after the Oct 9th and it looks different then the one I have. Draglink it's all yours!

Thanks for the pics
ST

RidgeRunner · #6 09-17-2010, 09:20 AM

Sounds good, and may I say that is a very classy move there DragLink.

nipper · #7 09-17-2010, 12:03 PM

Hey Twisted, you gonna be bringing your center console back to Indiana with you?

draglink · #8 09-17-2010, 12:54 PM

Quote:

Originally Posted by RidgeRunner

Sounds good, and may I say that is a very classy move there DragLink.

Thanks Vic!- Im not gonna try to snake it from somebody if they were first! But hey my console is 28" wide where this would mount. Looks like my original handrail had 3 mounts per side so it was a little different, but I think yours will work. My zipcode is 23072, do you have PayPal? Mike

RidgeRunner · #9 09-17-2010, 02:42 PM

I will measure it from flange to flange and get back to you. I am on my way to Lowe's to P/U a couple new measuring tapes. We had two die on us this week. Yes on the Paypal.

RidgeRunner · #10 09-17-2010, 03:43 PM

Well, I don't know if it will work. It measures:

29" Flange to Flange For the Forward Mounts (Closest to the wall in pic.)

29 5/16" Flange to Flange For the Rear Mounts.

I could see you tweaking it for 1/8" fit but not 1". Where were you measuring? I think the console tapers from bottom to top. Otherwise, factory could have changed up the console from 1978 to 1983. It is not bent much, if any, put a square on it and it is not out of square by much.