|
|
#1
|
||||
|
||||
Replacement gas cap
Well I left gas cap on the gunwhale of the boat when filling up this morning and noticed is was gone out on the water. Gas station was only 3 blocks from the ramp so I retraced my steps afterwards but no deal.
Anybody ever have to replace just the cap? I know I can get the whole fitting with cap and all but if anyone knows the thread size and particular info to just get a new screw on cap will save me some research and time.
__________________
1986 V-20 1986 Yamaha 150 HP 
|
|
#2
08-08-2010, 10:31 PM
|
||||
|
||||
|
RW, if it's just your average, everyday screw on gas cap I'm going to scrap my Cruisers boat anyways. You can have the cap that's on it. Sorry I just saw this post, or I'd have run it over. We can meet at the Dunkin Donuts on westbound 46 by the kMart in Parsippany some night this week if you'd like. Not sure of the condition of it.. Haven't looked at it in a while, but it's yours if you want it.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#3
08-09-2010, 09:10 AM
|
||||
|
||||
|
It's definitely worth shot...thanks for the offer.... Meeting you there is no problem as I can easily pass that spot on the way home from work. I dont think Boonton is too far out of your way assuming you are in Parsippany when heading home...would be glad to have you over to the house and pour you a beer for your troubles if your up to it. Either way is fine for me. Let me know what your schedule is. Thanks again
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#4
08-09-2010, 01:12 PM
|
||||
|
||||
|
I live in Wayne and work in Carlstadt...but used to work in Morris Township on Madison Ave @ JCP&L ...so am familiar with the area. I'll look at it tonight and make sure it's servicable.. Will let you know tonight when I get home.... Maybe can exchange it tomorrow night... I get out of work at 5, should be able to be there by 6...given traffic that time of night.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#5
08-09-2010, 08:14 PM
|
|||
|
|||
|
I had to replace the whole thing cause I could not find a new cap with the correct threads.....finding one off another old boat is your best bet.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#6
08-10-2010, 06:18 AM
|
||||
|
||||
|
I' make you the same offer on a cap assembly I made to BR...
 Installed... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
|
|
Linear Mode
