|
|
|
|
#1
|
||||
|
||||
Bow Rail Shine
My 82 is getting new SS fittings for the bow rail. I thought shining up the rail itself would be a snap. But have had no luck - it's not pitted just dull or maybe an etched, whiteish look. Any ideas or experience is appreciated. Same with the wind shield frame. Need some aluminum majic.
__________________
Pete 82 V-20 Merc 898 I/O 305ci V8 (gallery pg 5) 
|
|
#2
07-25-2005, 12:20 AM
|
||||
|
||||
|
Re: Bow Rail Shine
Wise Guy, I've tried several things on the Windshield frame w/ no good result...still tryin' to come up w/ solution there... ???...
Bow rail should shine up pretty good w/ FLITZ and maybe some abraisive cloth...what's the name of that stuff...can't think of it just now...3M makes a version of it... ::)...but the FLITZ oughtta work for ya... :D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#3
07-25-2005, 01:59 AM
|
||||
|
||||
|
Re: Bow Rail Shine
steel wool and vinegar works good on some stuff i found but steel wool and mothers wheel polish works good too i've used it on all types even motorcycle frames it works wonders on them. i'd try it on an area not seen to much first though. Good Luck
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#4
07-25-2005, 10:38 AM
|
||||
|
||||
|
Re: Bow Rail Shine
Try Nevr Dull. It comes in a blue can and is a soaked cotton material. Works great on the rail and any chrome surface. It didn't work to well on the windshield frame for me - but should definitely work on the bow rail.
__________________
1995 V21 w/175 Evinrude E-Tec Morganville, New Jersey
|
|
#5
07-25-2005, 10:45 AM
|
||||
|
||||
|
Re: Bow Rail Shine
DOING THE SAME THING WITH MY BOW RAIL, NEVER DULL DIDN'T WORK, EVEN USED A BUFFING WHEEL CHUCKED IN A DRILL PRESS WITH BUFFING COMPOUND TO LIMITED SUCCESS. GONNA TRY EXTREMLEY FINE STEEL WOOL NEXT.
__________________
I have been through some terrible things in my life, some of which actually happened.
|
|
#6
07-25-2005, 05:52 PM
|
||||
|
||||
|
Re: Bow Rail Shine
Well Wise Guy...there's FOUR different solutions to the bow-rail problem...now the problem is which to try first!!... ::)...
And the windshield frame...dismantle and PAINT or have E-Coated...black or med-drk gray... ;) ;D...of course MHO...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#7
07-25-2005, 10:57 PM
|
||||
|
||||
|
Re: Bow Rail Shine
Tried steelwool, bartenders friend, brasso, a little 600 paper on a inobvious spot, and anything I could think of. Do you think it was chrome plated and that the plating is gone? I see the shine in the area that was under the old fittings. I really thought this would be a simple quick shine deal. Hmmm - sure I have many other suprises!!
RP - So what do you think is involved in painting that? Special prep/special paint?
__________________
Pete 82 V-20 Merc 898 I/O 305ci V8 (gallery pg 5)
|
|
#8
07-25-2005, 11:06 PM
|
||||
|
||||
|
Re: Bow Rail Shine
Also, I've got pic's to post and a gallery request in. Is the only way, to open a photobucket account and transfer them there and back out? That seems to be the deal as is wrighten in the 'how to' section.
Pete
__________________
Pete 82 V-20 Merc 898 I/O 305ci V8 (gallery pg 5)
|
|
#10
07-26-2005, 09:32 AM
|
||||
|
||||
|
Re: Bow Rail Shine
Wise Guy, do you know the abrasive cloth I's tryin' to think of above?...if it were me(and I need to do this w/ mine) I'd use that stuff and elbow grease then clean w/ acetone THOROUGHLY then good quality metal primer(let cure) then 3 coats of finish color...of course make sure your choice of primer and finish are compatable...Krylon would probably be what I'd use...unless you got a way to spray an automotive or etching paint...good luck w/ it post some photos of your progress...sos we can WATCH!!!...we like to watch... ::)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
