![]() |
|
|
|
#1
|
|||
|
|||
|
Read a comparitive report indicating the G2 provides " noticeable improved fuel economy and performance over current Etec .....
Hummmmm............ we'll need to find someone willing to put one on a V20 / V21 . Minimum of 200 HO variety so we can discuss " how fast " etc. Let's start another " biggest engine on a V thread " ..... I'd say an Etec 200HO and Merc Opti 225 is the biggest outboard I've noticed. |
|
#2
|
||||
|
||||
|
OK FINE... if you guys wanna buy one I guess I can put the hideous thing on my V.... I'll dress it up with an old Chrysler shroud or wear a mask as I go whizzing up the river at mach 2.5
|
|
#3
|
|||
|
|||
|
I'd like to rig one of the 400hp racing outboards on my V21......just for a day.
Wellcraft should have had the max rated at 225 instead of 200. Too conservative. The Evinrude 225 HO likely puts out 240 hp at the prop. |
|
#4
|
||||
|
||||
|
The V-20's from about the late 70's on were rated at 235HP, the V-21 was the one rated for 200HP.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#5
|
|||
|
|||
|
Well then, there it is ......so a V20 with Rude 225 HO should run...... 55 ish.
Not too shabby |
|
#6
|
|||
|
|||
|
That's what my most recent purchase had, I'll have to ask the owner what he made top end, although I suspect his prop wasn't tall enough. My old 2.5 litre Mercury pushes my boat to almost 50 in flat water, but it's a rare day I can go anywhere near that fast. I'm looking to repower & my first choice is a 150 2 stroke. It seems the best weight to power bet.
__________________
Doug 87 Cuddy with a 94 Black Max 200! & a 1983 Cuddy, looking for power. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|