|
|
|
|
#1
|
||||
|
||||
glassing my wood built caps?
What ounce cloths or mats should I use to glass my caps on my boat? My cc has 10 inch caps that have built out of wood when it was converted from a steplift to a cc, how would you glass them in? Once again thanks guys for all the help in advance.
|
|
#2
11-30-2011, 08:59 AM
|
||||
|
||||
|
Got pictures? Are you encapsulating them in glass or are you glassing them directly to the hull?
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
|
#3
11-30-2011, 09:42 AM
|
||||
|
||||
|
Ridge the pics are on my va beach v20 build thread under general. They are structualy mounted now I'm just going to encapsulate
|
|
#4
12-01-2011, 07:02 AM
|
||||
|
||||
|
1.5 CSM? 1708 Sounds a little heavy. CSM with a light woven?
|
|
#5
12-01-2011, 11:50 AM
|
||||
|
||||
|
I would say that would be acceptable. Maybe a layer of CSM , 6 - 8oz cloth. The liners on the Wellcrafts were not very thick. I know yours isn't a liner but 2 layers of CSM would encapsulate. The smoother you make it the less time you spend sanding and fairing. I have never worked with 1708 (only 1208, heavy tri-axial, CSM, 4oz hardware cloth and 24 oz woven roving) so how smooth is the 1708 after wetout ? I have put CSM over 1208 and woven roving when I knew I would have to grind it back significantly in order to make it straight.
__________________
1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
