|
|
#1
|
||||
|
||||
FishBones is all Smiles
Got the call from the marina today, she's ready.
Went down, the mechanic happened to be there so got a chance to talk to him. Carbs were completely rebuilt, in line filter done. But for you fellows who own a JohnnyRude a little info, part of my problem was under the fly wheel which the mechanic pulled. Seems that OMC in their infinite wisdom uses a coating on the stator area, that coating had dried out and almost melted, least that is how it looks. The plasticky looking crap got under my timing arm and was binding it up and not allowing it to move its full range. He cleaned that all out to. Results - perfect 750-800 rpm idle. Runs like a top, took her for a nice long run. Fishes beware, Willy is in town!
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
|
#2
05-03-2011, 05:11 PM
|
||||
|
||||
|
Sweet post up some new pictures of the bad to the bone fishin machine.
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#4
05-03-2011, 06:27 PM
|
||||
|
||||
|
RWilson may be going out with me on Thursday. If we do get out I will get some pics then, now I have to focus on getting my trailer better set up or a new one and look out NJ Get Together here I come
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#5
05-03-2011, 07:36 PM
|
||||
|
||||
|
Quote:
i'm good for Thursday, got my wife to reschedule her thing from Thursday evening.....Will give you a call tomorrow.
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#6
05-03-2011, 08:40 PM
|
||||
|
||||
|
Roger that
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#7
05-04-2011, 05:18 AM
|
||||
|
||||
|
You two tear 'em up on Thurs!!...and you better take a camera...come back w/fish and pics!!...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#8
05-04-2011, 06:51 AM
|
||||
|
||||
|
Roger that, will seek them out.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW Last edited by willy; 05-04-2011 at 07:03 AM.
|
|
#9
05-05-2011, 07:19 PM
|
|||
|
|||
|
Willy:
I would be suspicious that your motor gotten hot in the past? The only time I have seen a OMC stator coating melt is due to heat. I got really old junk that just is still just fine ;-) Kamiakze
__________________
 74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process)
|
|
#10
05-05-2011, 07:43 PM
|
||||
|
||||
|
Quote:
Well??...  ...8:42...impatiently WAITING!!...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
